Roddio F-tune carbon crown driver removal sleeve

The S design driver had a size of 460cc, but the driver released in 2023 will be released in a slightly smaller size of 440cc.
By reducing the head volume, the distance to the center of gravity is shortened, making it easier to swing through.

The F-tune head uses carbon in the crown, making it lighter and with a lower center of gravity. It tends to have less backspin than M tune. We recommend choosing a head with a large loft angle to ensure a good launch angle.
The face uses a softer material than the S design, but the feeling of hitting the ball is stronger compared to the F tune.
F-tune face angle is standard -1°.

The standard weight is 191g±, so the finished product is planned to be 46.0 inches/C balance.
*By selecting the weight, you can change the head weight by 3g with 3 pieces.
For those who want to reduce the total weight of the club, we recommend the carbon crown F tune.

The detachable sleeve allows you to replace the shaft and change the head angle with a single wrench.
If you want fine setting, please select adhesive sleeve head.

Head colors are available in two colors: matte crown/IP black face and glossy crown/silver face.

There are two types of lofts: Mid (10.0 degrees - 11.0 degrees) and High (11.0 degrees - 12.0 degrees), and the manufacturer manages them in 0.1 degree increments. Use from inside.

3 weight screws are standard setting 2.5g. There are 1.5g and 3.5g as selectable weights. Basically, we will select one2one based on your desired length and balance of the finished product.

Release: September 28, 2023

*Please consult us regarding loft, club balance, club length, etc.

This driver has more options.
[Material]: M-Tune (full titanium) and F-Tune (carbon crown on titanium body)
[Sleeve]: Detachable (sleeve socket type) and fixed
[Color]: Black (matte black) (black face on the crown) and silver (silver face on the glossy crown)


*In addition to the main body color, you can choose the "star", "moon", or "sun" marks for the weight screw. Masu. Please add it in the notes section. If you do not have any requests, we will prepare one of each. There is no relationship between mark and weight.

*A wide range of specifications can be manufactured by selecting weight screws, hatches, and shaft grips. We may contact customers directly for consultation if we determine that a consultation is necessary after placing an order.

	F-Tune (Mid)	F-Tune (High)
Loft (°)	10.5°±0.5	12°±0.5
Lie (°)	60.0°	60.0°
Face Angle (°)	-1	±0.0
Weight (g)	191g	190g
Head Volume (cc)	440cc
Material	Body：8-1-1Light Weigt Titanium
	Crown：Carbon
	Face：15-3-3-3 Titanium
	Hosel/ Sleeve：Aluminum

※We do not sell parts for the head alone.

You can also select parts that are not listed in the order club options.You can order from the following manufacturers.

Trading Manufacturers

Shaft
Fujikura/Mirsubishi/GraphiteDesign/Roddio/USTMamiya/Triphas/Composite Techno/TRPX/Syncagraphite/Dead or Alive/Gravity/Threering/Sankiplanaria/S-trixx/True Temper/Nippon Shaft/Shimada Golf/KBS/Design Tuning/Stability/Reve/Auto Flex/&etc.

Grip
Golf Pride/Iomic/Elite Grip/STM/No,1/Susas/Winn/Palmax/Cadero/Super Stroke/Masuda Golf/Muziik/Perfect Pro/&etc.