Epon Golf S:R Hybrid Men

The name has changed from EF to S:R. All S:R models are equipped with the "Any-C system".
The theory of the AK-26 previously developed by Epon Golf has been refined, making it possible to set up the same specifications from driver to sand wedge.

The theme is "effective use of the shaft" - drawing out the power of the shaft without increasing the club length.
In any club, the tip of the shaft is glued to the head, but in this driver, the shaft's bonding position is moved about 1 inch closer to the ground, increasing the shaft's flex by 1 inch.

In the structure of a typical club, a celluloid part called a socket is attached to the joint between the head and the shaft. This driver has a celluloid socket and an elastomer socket made of the same material as the grip.
The soft elastomer is on the head side. By using this soft material, it is possible to give movement to the shaft. The shaft flexes even inside the head, making it possible to increase the movement of the head.


This movement allows the shaft to play a major role, and the low position of the joint between the head and shaft reduces loss of power at impact, increasing the loft and raising the launch angle.

The S:R series adopts a design that combines a fairway wood and a utility club, and is given the name hybrid.
It has a structure that makes it easier to get the ball higher than regular EPON golf models. Please select the club by loft angle, not by the name fairway wood or utility club.

U2/17°
U3/19°
U4/21°

The S:R comes with a dedicated torque wrench (S:R logo). It is a 7N wrench, which is about twice as strong as the AF series wrench (EPON logo). The S:R wrench generates stronger torque, so using it on other clubs may damage screws, etc.

Sole weight
There are 5 types of weight screws.
Standard weight: 4g
Optional weights: 2g/6g/8g/10g

Includes head cover and dedicated torque wrench
Release: June 2026

	#2	#3	#4
Loft(°)	17	19	21
Lie(°)	58.75	59.50	60.25
Volume(cc)	170	164	152
Weight(g)	220.0	231.0	244.0
Face Angle(°)	±0
Material	High-strength titanium alloy
Finish	Black IP

※We do not sell parts for the head alone.

You can also select parts that are not listed in the order club options.You can order from the following manufacturers.

Trading Manufacturers

Shaft
Fujikura/Mirsubishi/GraphiteDesign/Roddio/USTMamiya/Triphas/Composite Techno/TRPX/Syncagraphite/Dead or Alive/Gravity/Threering/Sankiplanaria/S-trixx/True Temper/Nippon Shaft/Shimada Golf/KBS/Design Tuning/Stability/Reve/Auto Flex/&etc.

Grip
Golf Pride/Iomic/Elite Grip/STM/No,1/Susas/Winn/Palmax/Cadero/Super Stroke/Masuda Golf/Muziik/Perfect Pro/&etc.